The tray says why the engine is not running, and setup will not run under a live app

Seen on the demo PC: Start did nothing and Stop stayed grey. The
supervisor's engine had failed because a second engine already held
port 8010, and the tray reported that as nothing at all. The supervisor
now keeps the engine's last lines and turns the known ones into a
sentence - 'port 8010 is already in use - another Behavision or its
engine is still running', 'run behavision-setup again' - which the tray
and the window show. Tray clicks no longer run on the menu loop, so a
stop that waits for the process cannot make the menu look dead.

Two ways that second process came to exist are closed: setup refuses to
run while Behavision.exe or the agent is up, and the app watches
agent.json so a claim made underneath it - which rotates the API token
- is picked up instead of leaving camera sync refused until a restart.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KGcjxF1cNLcuwc3DAPcnfj

agent/cmd/behavision-setup/main.go

@@ -92,6 +92,12 @@ func run() error {
 		}
 	}
 
+	if running := behavisionRunning(); running != "" {
+		return fmt.Errorf("%s is running. Quit Behavision from the tray icon first, then run setup again.\n\n"+
+			"Setting up underneath a running copy starts a second engine on the same port and, in a demo,\n"+
+			"re-claims the shop while the open app still holds the old credentials.", running)
+	}
+
 	py, ver, err := findPython()
 	if err != nil {
 		return err
@@ -136,6 +142,16 @@ func run() error {
 	// Proving it starts is the point. An installer that reports success and
 	// leaves a shop with an engine that will not run has done worse than
 	// failing: the failure surfaces later, to someone who did not install it.
+	// Joining a shop: head office supplies the cameras, so any left on this PC
+	// from an earlier install go first. Otherwise the reconciler offers them UP
+	// to head office - without their passwords, which the engine never returns
+	// - and the shop ends up with the same lens listed twice, one copy of which
+	// can never be pushed to another PC. Measured on the first claimed demo.
+	if bundle != nil && bundle.EnrolCode != "" {
+		if err := os.Remove(paths.CamerasFile()); err == nil {
+			step("Earlier cameras", "removed - head office supplies them now")
+		}
+	}
 	if err := smokeTest(vpy, demoCams); err != nil {
 		return fmt.Errorf("the engine installed but would not start: %w", err)
 	}
@@ -200,6 +216,22 @@ func engineSource() (string, error) {
 // `py -3` first on Windows: the launcher is what the official installer puts
 // on PATH, and `python` there is often the Microsoft Store stub that prints an
 // advert and exits 9009 instead of running anything.
+// behavisionRunning names a Behavision process if one is up. Windows only -
+// that is the platform setup ships on - and by image name via tasklist, which
+// needs no extra privilege.
+func behavisionRunning() string {
+	if runtime.GOOS != "windows" {
+		return ""
+	}
+	for _, name := range []string{"Behavision.exe", "behavision-agent.exe"} {
+		out, err := exec.Command("tasklist", "/FI", "IMAGENAME eq "+name, "/NH").Output()
+		if err == nil && strings.Contains(strings.ToLower(string(out)), strings.ToLower(name)) {
+			return name
+		}
+	}
+	return ""
+}
+
 func findPython() (string, string, error) {
 	type cand struct {
 		exe  string
@@ -523,6 +555,7 @@ func claimShop(code, base string) (string, error) {
 	cfg.AgentToken = b.AgentToken
 	cfg.CloudBase = base
 	cfg.Standalone = false
+	cfg.SessionToken, cfg.SessionRefresh, cfg.SessionEmail = "", "", ""
 	caPath, err := enrol.SaveCA(b.CACert, paths.BrokerCA())
 	if err != nil {
 		return "", err

agent/main.go

@@ -119,6 +119,7 @@ func cmdClaim(args []string) error {
 	cfg.BrokerPassword = b.MQTTPass
 	cfg.AgentToken = b.AgentToken
 	cfg.CloudBase = base
+	cfg.SessionToken, cfg.SessionRefresh, cfg.SessionEmail = "", "", ""
 	caPath, err := enrol.SaveCA(b.CACert, paths.BrokerCA())
 	if err != nil {
 		return err

agent/pkg/engine/supervisor.go

@@ -21,6 +21,7 @@ import (
 	"net/http"
 	"os"
 	"os/exec"
+	"strings"
 	"sync"
 	"time"
 )
@@ -218,13 +219,26 @@ func (s *Supervisor) runOnce(ctx context.Context) error {
 	kill = k
 	defer release()
 
+	// The last few lines the engine printed travel with the failure, because
+	// "engine exited: exit status 1" sends somebody to a log file on a shop
+	// PC, and the one line that matters - "port 8010 is already in use" - was
+	// right there.
+	var tailMu sync.Mutex
+	var tail []string
 	pumped := make(chan struct{})
 	go func() {
 		defer close(pumped)
 		sc := bufio.NewScanner(stdout)
 		sc.Buffer(make([]byte, 0, 64*1024), 1024*1024)
 		for sc.Scan() {
-			fmt.Fprintln(s.opts.LogWriter, sc.Text())
+			line := sc.Text()
+			fmt.Fprintln(s.opts.LogWriter, line)
+			tailMu.Lock()
+			tail = append(tail, line)
+			if len(tail) > 12 {
+				tail = tail[1:]
+			}
+			tailMu.Unlock()
 		}
 	}()
 
@@ -238,6 +252,12 @@ func (s *Supervisor) runOnce(ctx context.Context) error {
 		return nil
 	}
 	if waitErr != nil {
+		tailMu.Lock()
+		reason := explain(tail)
+		tailMu.Unlock()
+		if reason != "" {
+			return fmt.Errorf("%s (%v)", reason, waitErr)
+		}
 		return fmt.Errorf("engine exited: %w", waitErr)
 	}
 	return errors.New("engine exited unexpectedly with status 0")
@@ -373,3 +393,28 @@ func LogFile(path string) (*os.File, error) {
 	}
 	return os.OpenFile(path, os.O_CREATE|os.O_WRONLY|os.O_APPEND, 0o600)
 }
+
+// explain turns the engine's last output into the sentence the tray shows.
+// The cases are the ones seen on real installs; anything else shows the last
+// non-empty line verbatim.
+func explain(tail []string) string {
+	last := ""
+	for _, l := range tail {
+		low := strings.ToLower(l)
+		switch {
+		case strings.Contains(low, "address already in use") || strings.Contains(low, "only one usage of each socket address"):
+			return "port 8010 is already in use - another Behavision or its engine is still running"
+		case strings.Contains(low, "no module named behavision"):
+			return "the engine is not installed in this Python - run behavision-setup again"
+		case strings.Contains(low, "modulenotfounderror") || strings.Contains(low, "importerror"):
+			return "the engine is missing a library - run behavision-setup again"
+		}
+		if strings.TrimSpace(l) != "" {
+			last = strings.TrimSpace(l)
+		}
+	}
+	if len(last) > 120 {
+		last = last[:120] + "…"
+	}
+	return last
+}

agent/pkg/paths/paths.go

@@ -70,6 +70,12 @@ func APICredentials() string {
 	return filepath.Join(StateRoot(), "data", "api_credentials.txt")
 }
 
+// CamerasFile is the engine's own camera store. The agent never edits it -
+// cameras go through the engine's API so passwords are sealed - but setup
+// removes it when a PC joins a shop, because head office is the source of
+// truth from then on.
+func CamerasFile() string { return filepath.Join(StateRoot(), "data", "cameras.json") }
+
 // EnsureState creates the writable tree. Called before anything opens a file
 // under it, so a first run on a fresh machine does not fail on a missing dir.
 func EnsureState() error {

desktop/app.go

@@ -125,6 +125,7 @@ func (a *App) startup(ctx context.Context) {
 	})
 
 	a.startPipeline(ctx)
+	go a.watchConfig(ctx)
 
 	// Recognition starts with the app. Until this, the engine only ever
 	// started when somebody pressed Start - which meant a till that rebooted
@@ -435,6 +436,9 @@ func (a *App) Claim(code string) (SessionInfo, error) {
 	a.cfg.BrokerPassword = b.MQTTPass
 	a.cfg.AgentToken = b.AgentToken
 	a.cfg.CloudBase = a.cloud.Base
+	// A new head office: whoever was signed in was signed in somewhere else.
+	a.cfg.SessionToken, a.cfg.SessionRefresh, a.cfg.SessionEmail = "", "", ""
+	a.cloud.Clear()
 	caPath, err := enrol.SaveCA(b.CACert, agentpaths.BrokerCA())
 	if err != nil {
 		return SessionInfo{}, err
@@ -464,6 +468,62 @@ func (a *App) Claim(code string) (SessionInfo, error) {
 // the current config. Only Claim needs it today; it exists as its own method
 // because "stop everything that reads the config, then start it" is the part
 // that is easy to get half right.
+// watchConfig reloads agent.json when something else writes it.
+//
+// behavision-setup re-run on a PC with the app open re-claims the shop and
+// rotates its API token; the running app kept the old one and every camera
+// sync was refused from then on - heartbeats still flowed, so head office
+// looked fine while the cameras went stale. A claim from `behavision-agent
+// claim` does the same. Rather than ask people to restart the app, the app
+// watches the file and picks the new credentials up itself.
+func (a *App) watchConfig(ctx context.Context) {
+	path := agentpaths.AgentConfig()
+	last := mtime(path)
+	t := time.NewTicker(10 * time.Second)
+	defer t.Stop()
+	for {
+		select {
+		case <-ctx.Done():
+			return
+		case <-t.C:
+		}
+		now := mtime(path)
+		if now.IsZero() || now.Equal(last) {
+			continue
+		}
+		last = now
+		fresh, err := agentcfg.Load(path)
+		if err != nil {
+			continue
+		}
+		fresh = fresh.WithEngineCredentials(agentpaths.APICredentials())
+		a.mu.Lock()
+		changed := fresh.AgentToken != a.cfg.AgentToken || fresh.SiteID != a.cfg.SiteID ||
+			fresh.BrokerPassword != a.cfg.BrokerPassword || fresh.CloudBase != a.cfg.CloudBase ||
+			fresh.Standalone != a.cfg.Standalone
+		if changed {
+			// Keep this process's live session; a claim clears it in the file
+			// deliberately, and that is honoured too.
+			a.cfg = fresh
+			if fresh.SessionToken == "" {
+				a.cloud.Clear()
+			}
+		}
+		a.mu.Unlock()
+		if changed {
+			a.restartPipeline()
+		}
+	}
+}
+
+func mtime(path string) time.Time {
+	st, err := os.Stat(path)
+	if err != nil {
+		return time.Time{}
+	}
+	return st.ModTime()
+}
+
 func (a *App) restartPipeline() {
 	if a.stopBridge != nil {
 		a.stopBridge()

desktop/frontend/dist/index.html

@@ -4,7 +4,7 @@
     <meta charset="UTF-8" />
     <meta name="viewport" content="width=device-width, initial-scale=1.0" />
     <title>Behavision</title>
-    <script type="module" crossorigin src="./assets/index-upywadx9.js"></script>
+    <script type="module" crossorigin src="./assets/index-C-oYbwC6.js"></script>
     <link rel="stylesheet" crossorigin href="./assets/index-Z_jL3Bie.css">
   </head>
   <body>

desktop/frontend/src/App.jsx

@@ -40,10 +40,20 @@ export default function App() {
   const [helping, setHelping] = useState(false)
 
   useEffect(() => {
-    (async () => {
+    let alive = true
-      try { setSession(await api.session()) } catch { setSession(null) }
+    const load = async () => {
-      setBooting(false)
+      try {
-    })()
+        const s = await api.session()
+        if (alive) setSession(prev => JSON.stringify(prev) === JSON.stringify(s) ? prev : s)
+      } catch { if (alive) setSession(null) }
+      if (alive) setBooting(false)
+    }
+    load()
+    // Re-read every few seconds: a session the server has ended - or one
+    // that never belonged to this head office - must put Login back on
+    // screen, not leave "session expired" banners on every page.
+    const id = setInterval(load, 8000)
+    return () => { alive = false; clearInterval(id) }
   }, [])
 
   if (!isDesktop()) {

desktop/frontend/src/views/Assistant.jsx

@@ -36,7 +36,12 @@ export default function Assistant({ session, onClose }) {
       const a = await api.ask(history.map(t => ({ role: t.role, text: t.text })))
       setTurns([...history, { role: 'assistant', text: a.text, used: a.used ?? [] }])
     } catch (e) {
-      setError(message(e))
+      const m = message(e)
+      // Her only failure that is not hers: the login is gone. Say what to do,
+      // not "session expired" - the shell returns to Login within seconds.
+      setError(/session expired|unauthori[sz]ed/i.test(m)
+        ? 'You’re signed out of head office, so I can’t look anything up. Sign in again and ask me once more.'
+        : m)
       setTurns(turns) // the question stays in the box, not in the transcript
       setDraft(q)
     } finally { setBusy(false) }

desktop/internal/cloud/client.go

@@ -108,8 +108,16 @@ func (c *Client) do(ctx context.Context, method, path string, body, out any) err
 	}
 	if rerr := c.Refresh(ctx); rerr != nil {
 		// The refresh token is gone too, so this really is a sign-in, not a
-		// transient failure. Report it as such so the UI shows the login sheet
+		// transient failure. Forget the session - in memory AND on disk, through
-		// rather than an error dialog.
+		// the same callback that persists rotations - so the app goes back to
+		// Login instead of showing "session expired" on every screen until
+		// somebody finds Sign out. Seen on a PC that had been claimed against a
+		// demo head office and then re-claimed against the real one: the old
+		// login sat there, dead, for the whole session.
+		c.Clear()
+		if c.onRefresh != nil {
+			c.onRefresh(Session{})
+		}
 		return ErrUnauthorized
 	}
 	return c.send(ctx, method, path, raw, out)

desktop/tray.go

@@ -101,9 +101,11 @@ func (t *tray) onReady(ctx context.Context) {
 		case <-t.mOpen.ClickedCh:
 			runtime.Show(ctx)
 		case <-t.mStart.ClickedCh:
-			t.app.StartEngine()
+			// Never on the menu loop itself: a stop waits for the process to
+			// exit, and a menu that is deaf for the duration looks broken.
+			go func() { t.app.StartEngine(); t.refresh() }()
 		case <-t.mStop.ClickedCh:
-			t.app.StopEngine()
+			go func() { t.app.StopEngine(); t.refresh() }()
 		case <-t.mLogs.ClickedCh:
 			runtime.BrowserOpenURL(ctx, "file://"+logsDir())
 		case <-t.mQuit.ClickedCh:
@@ -129,23 +131,29 @@ func (t *tray) poll(ctx context.Context) {
 		case <-ctx.Done():
 			return
 		case <-tick.C:
-			s := t.app.EngineStatus()
+			t.refresh()
-			state, label := describe(s)
+		}
-			systray.SetIcon(iconFor(state))
+	}
-			systray.SetTooltip("Behavision — " + label)
+}
-			if t.mStatus != nil {
+
-				t.mStatus.SetTitle(label)
+// refresh redraws the icon and the menu from EngineStatus - the same source
-			}
+// the window reads, so the two cannot disagree.
-			running := s.State == "running"
+func (t *tray) refresh() {
-			if t.mStart != nil && t.mStop != nil {
+	s := t.app.EngineStatus()
-				if running {
+	state, label := describe(s)
-					t.mStart.Disable()
+	systray.SetIcon(iconFor(state))
-					t.mStop.Enable()
+	systray.SetTooltip("Behavision — " + label)
-				} else {
+	if t.mStatus != nil {
-					t.mStart.Enable()
+		t.mStatus.SetTitle(label)
-					t.mStop.Disable()
+	}
-				}
+	running := s.State == "running" || s.State == "starting" || s.State == "backoff"
-			}
+	if t.mStart != nil && t.mStop != nil {
+		if running {
+			t.mStart.Disable()
+			t.mStop.Enable()
+		} else {
+			t.mStart.Enable()
+			t.mStop.Disable()
 		}
 	}
 }
@@ -160,7 +168,9 @@ func describe(s EngineStatus) (state, label string) {
 	case s.State == "stopped":
 		return "stopped", "Stopped"
 	case s.State == "failed":
-		return "error", "Failed — " + firstLine(s.Error)
+		// The supervisor's error is already a sentence (port in use, missing
+		// library); show it whole, because it is the thing to act on.
+		return "error", "Not running — " + firstLine(s.Error)
 	case s.State == "backoff":
 		return "error", fmt.Sprintf("Restarting (%d attempts)", s.Restarts)
 	case !s.Reachable:

installer/build.ps1

@@ -71,7 +71,7 @@ Push-Location (Join-Path $root "desktop")
 # from brand/loyaly-icon-512.png), and `wails build` would add a second copy
 # of both and fail the link with duplicate resources.
 $env:CGO_ENABLED = "0"
-go build -ldflags "-H windowsgui -X main.version=$Version" -o (Join-Path $root "desktop\build\bin\Behavision.exe") .
+go build -tags desktop,production -ldflags "-H windowsgui -X main.version=$Version" -o (Join-Path $root "desktop\build\bin\Behavision.exe") .
 if ($LASTEXITCODE -ne 0) { throw "desktop build failed" }
 Pop-Location
 

release.sh

@@ -32,7 +32,10 @@ fi
 step "1. Desktop app (Wails, pure-Go Windows target)"
 (cd desktop/frontend && npm run build >/dev/null)
 rm -rf "$STAGE" && mkdir -p "$STAGE/engine-src"
-(cd desktop && CGO_ENABLED=0 GOOS=windows GOARCH=amd64 go build -trimpath \
+# -tags desktop,production is what `wails build` passes; without them the
+# binary starts, shows "Wails applications will not build without the correct
+# build tags" and exits. Measured on the first Windows install of v0.4.4-demo.
+(cd desktop && CGO_ENABLED=0 GOOS=windows GOARCH=amd64 go build -trimpath -tags desktop,production \
   -ldflags "-H windowsgui -s -w -X main.version=$TAG" -o "../$STAGE/Behavision.exe" .)
 
 step "2. Agent and setup tool"